Manual

Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014 59

Chapter

Specific Features of the 1732E-OB8M8SR

Scheduled Output Module

Introduction

This chapter describes the features specific to the 1732E Scheduled Output

module.

These features can be configured through the RSLogix 5000 software.

Determine Module

Compatibility

The Scheduled Output module 1732E-OB8M8SR serves to provide high speed

scheduling of every output signal based on time scheduling. Time scheduling is

obtained via CIP synchronization (CIP Sync).

All outputs can be individually scheduled. Users shall be able to define the

number of outputs to be used for scheduling purposes, leaving the other outputs

for use as “normal” outputs.

When designing a system using this module, you must consider:

• the voltage necessary for your application

• whether you need a solid state device

• current leakage

• if your application should use sinking or sourcing wiring.

For more information on compatibility of other Rockwell Automation products

to modules, see the I/O Systems Overview, publication CIG-SO001

Topic Page

Determine Module Compatibility 59

Operational Modes 60

Time-Scheduled Output Control 60

Configurable Point-Level Output Fault States 61

Output State 62