supporting Sequence of Events
Table Of Contents
- 1732E-UM002A-EN-E 1732E EtherNet/IP ArmorBlock Supporting Sequence of Events User Manual
- Important User Information
- Table of Contents
- Preface
- Chapter 1 - About 1732E ArmorBlock Modules
- Chapter 2 - Module Overview
- Chapter 3 - Use the Module in an ArmorBlock System
- Chapter 4 - Install Your Module
- Chapter 5 - Configure the Module for Your EtherNet/IP Network
- Chapter 6 - Configure the Module Using RSLogix 5000
- Introduction
- Set Up the Hardware
- Create the Example Application
- Configure Your I/O Module
- Overview of the Configuration Process
- Add a New Bridge and Module to Your RSLogix 5000 Project
- Use the Default Configuration
- Change the Default Configuration
- Download Your Configuration
- Edit Your Configuration
- Access Module Data in RSLogix 5000
- Configure RSLogix 5000 and the 1756-EN2T Communication Module for CIP Sync
- Chapter Summary and What’s Next
- Chapter 7 - Module Features
- Introduction
- Determine Module Compatibility
- Module Features That Can Be Configured
- Chapter Summary and What’s Next
- Chapter 8 - Using the Module
- Chapter 9 - Interpret Status Indicators
- Chapter 10 - Troubleshoot the Module
- Appendix A - ArmorBlock 2 Port Ethernet Module Specifications
- Appendix B - Module Tags
- Appendix C - 1732E EtherNet/IP ArmorBlock Supporting Sequence of Events Data Tables
- Appendix D - Connect to Networks via Ethernet Interface
- Appendix E - 1732E ArmorBlock I/O Embedded Web Server
- Glossary
- Index
- How Are We Doing?
- Back Cover
27 Publication 1732E-UM002A-EN-P - March 2010
Chapter
6
Configure the Module Using RSLogix 5000
Introduction
This chapter guides you through the steps required to configure your 1732E
EtherNet/IP ArmorBlock Supporting Sequence of Events using
RSLogix 5000 software. Note that the modules presented in this chapter are
configured using RSLogix 5000 software, version 17 or later. The chapter
contains the following main sections:
Topic Page
Set Up the Hardware 28
Create the Example Application 29
Configure Your I/O Module 30
Overview of the Configuration Process 30
Add a New Bridge and Module to Your RSLogix 5000 Project 30
Use the Default Configuration 34
Change the Default Configuration 34
Download Your Configuration 37
Edit Your Configuration 37
Access Module Data in RSLogix 5000 38