User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 273
1715-IB16D Digital Input Module Diagnostics Appendix C
Threshold Diagnostics Settings
There are three types of threshold diagnostics settings to choose from in the
Logix Designer application:
• Full Diagnostics Configuration
• None Diagnostics Configuration
• Custom Diagnostics Configuration
Full Diagnostics Configuration
Selecting Full in the Diagnostics pull-down menu loads a set of threshold default
values into the threshold settings. This must be selected if an EOL is used.
Figure 72 - Full Diagnostics Threshold Default Values