User Manual Owner manual

192 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
Add a 1715-OF8I Analog
Output Module to the Project
In this section, you do the following:
• Add a 1715-OF8I analog output module in Duplex mode to the project.
• Add a 1715-OF8I analog output module in Simplex mode to the project
Step 1: Add a 1715-OF8I Analog Output Module in Duplex Mode
1. Add the new module, referring to page 172.
The Select New Module dialog box appears.
2. Expand the Analog module list, select the 1715-OF8I module, and click
OK.
The General tab appears.