User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 191
Configure the Redundant I/O System Chapter 5
The Verify Module Properties dialog box appears. See page 180.
6. Click Yes.
A new General tab appears showing only one slot as available. The module
is now in Simplex mode.
7. Click the Connection tab, referring to page 163
.
8. Click the Module Info A tab, referring to page 165
.
9. Click the Configuration tab, referring to page 189
.
10. Click OK.
Your project’s I/O configuration folder now looks similar to this.