User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 187
Configure the Redundant I/O System Chapter 5
Add a 1715-IF16 Analog
Input Module to the Project
In this section, you do the following:
Add a 1715-IF16 analog input module in Duplex mode to the project.
Add a 1715-IF16 analog input module in Simplex mode to the project.
Step 1: Add a 1715-IF16 Analog Input Module in Duplex Mode
Add a new 1715-IF16 Analog Input module in Duplex mode to the project.
1. Add the new module, referring to page 172
.
The Select Module dialog box appears.
2. Expand the Analog module list, select the 1715-IF16 module, and click
OK.