User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 185
Configure the Redundant I/O System Chapter 5
Step 2: Add a 1715-OB8DE Digital Output Module in Simplex Mode
Add a new 1715-IB16D Digital Input module in Simplex mode to the project.
1. Add the new module, referring to page 172
.
2. Select the 1715-OB8DE Digital Output module, referring to page 172
,
and click OK.
The General tab appears.
3. Enter the module name.
Notice that there are still two slot numbers displayed, indicating that the
module is in the default Duplex mode.
4. Click Change, referring to Steps 6, 7, and 8 on page 179
.