User Manual Owner manual

182 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
The General tab appears.
3. Enter the parameters.
They are similar to the settings on page 174
4. Click Change.
5. Enter the parameters, referring to page 175
.
6. Click OK.
7. Click the Connection tab, referring to page 163
.
8. Click the Module Info A tab, referring to page 165
.
9. Click the Module Info B tab, referring to page 165
.
10. Click the Configuration tab.