User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 13
Preface
This manual explains how to install and set up the 1715 Redundant I/O System.
This redundant, modular system is designed to work in conjunction with a
ControlLogix Enhanced Redundancy System. This system provides fault
tolerant I/O and redundancy for use in critical process applications.
This manual is intended for the following individuals, who:
– Understand how to configure and use a ControlLogix System, as well as
a ControlLogix Enhanced Redundancy System
– Understand how to configure remote devices on an Ethernet/IP
network.
Before You Begin
Before you begin using your 1715 Redundant I/O System, verify that you have
the software required to install and configure your system.
Required Software
This list identifies the minimum software versions required to use your 1715
Redundant I/O System:
• RSLogix™ 5000 programming software, version 19
• RSLogix 5000 programming software, version 20 or later when using
SIL 2 operations
• RSLinx® Classic software, version 2.57
• Microsoft Windows XP Service Pack 2, or higher; Microsoft Windows
Vista; Microsoft Windows 7, 32- and 64-bit; and Microsoft Windows
2003 Server operating systems
• Adapter Add-on Profile at: Product Compatibility and Download Center
website
• I/O Modules Add-on Profile at: Product Compatibility and Download
Center website
ATTENTION: ControlLogix L7 controllers are certified in RSLogix 5000 version
20 or later for SIL 2 operations. See the latest certifications for software and
firmware at http://www.rockwellautomation.com
. See the TÜV website at
http://www.tuvasi.com
for SIL 2 certification listings.