User Manual Owner manual

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 121
Installation Instructions Chapter 2
Remove Modules
Modules can be removed online without shutting the system down or upsetting
the process in redundant configurations only. However, pulling out simplex
module impacts the process.
Modules are removed by carefully pulling them out of the base unit by using this
procedure.
1. Turn the locking screw on the front of the module 1/4 turn counter
clockwise.
The screw slot is vertical when the module is unlocked.
Unlocked Position
Turn locking screw 1/4 turn
counter clockwise until
vertical.
32084-M