Manual

Chapter
1
Product Overview
This chapter contains the following information:
• The physical layout of the module.
• Overview and components.
Module Description
The IB1 Module is an optional interface device designed to provide a
direct, digital link between an InterBus Master and the 160 Drive. The
module connects to the drive through the expansion/keypad port on
the front of the drive. Refer to the Figure 1.1 for general layout of the
module and Chapters 4 or 8 for details on the LED indicators.
The IB1 Module has the following characteristics:
• 3 word process data channel (control, reference & diagnostics)
• 1 InterBus PCP telegram for configuration and reading of drive
parameters and error codes
• DRIVECOM 20 (part of 21) profile support.
Figure 1.1
Module Front View
9 Pin, Male D-Shell Connector
Refer to Chapter 3 for Details
Module Installation Latch
Nameplate
Provides Firmware Version
and Series Letter
Status LEDs
Refer to Chapters 4 & 8
for Further Information