User Manual, 100/110 A Manual
12 Rockwell Automation Publication 1608P-IN002B-EN-P - May 2014
Chapter 2 Installation
4- Wire Models
Bulletin 1608P part numbers containing V4 are configured for 4-wire source (L1,
L2, L3, N) and either 3-wire or 4-wire loads. The source N conductor must be
connected for proper operation of these models. Connect both input and output
N conductors to the bus bar labeled NEUTRAL (See Figure 7
). Figure 6 shows
the 4-wire ProDySC system wiring schematically, including the recommended
Bypass Switch.
Figure 6 - ProDySC 4-Wire Configuration.