Reference Manual

All parameters are specified at 24V, 80A output current, 25ªC ambient and after a 5 minutes run-in time, unless noted otherwise.
Rockwell Automation Publication 1606-RM011A-EN-P — February 2014 13
Bulletin 1606 Switched Mode Power Supplies
15. Physical Dimensions and Weight
Weight 440g / 0.97lb
DIN Rail Use 35mm DIN rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
The DIN rail height must be added to the unit depth (127mm) to calculate the total required
installation depth.
Installation clearances See section 2.
Fig. 15-1 Front view Fig. 15-2 Side view