Reference Manual Instruction Manual

All parameters are specified at 24V, 2.5A, 230Vac input, 25ªC ambient and after a 5 minutes run-in time unless noted otherwise.
Rockwell Automation Publication 1606-RM035A-EN-P — April 2014 13
Bulletin 1606 Switched Mode Power Supplies
14. Physical Dimensions and Weigth
Weight 140g / 0.31lb
DIN Rail Use 35mm DIN rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
The DIN rail height must be added to the unit depth (91mm) to calculate the total required
installation depth.
Installation clearances See section 2.
Fig. 14-1 Front view Fig. 14-2 Side view
15. Accessories
DIN rail bracket for wall or panel mount:
A suitable DIN rail bracket is available upon request.
The picture of the power supply is for representation only.