Reference Manual Instruction Manual

ManualsBrandsRockwell Automation ManualsEquipment1606-XLSBATBR1 Power Supply

Reference Manual

Bulletin 1606 Switched Mode Power Supplies

Catalog Numbers: 1606-BATASSY1, 1606-XLSBAT1, 1606XLSBATBR1

•DC-UPS—Uninterruptible power supply with DC Input.

•Normal mode—Describes a condition in which the battery is charged, the input voltage is in range and the output is loaded within the

allowed limits.

• Buffer mode—Describes a condition where the input voltage is below the transfer threshold level, the unit is running on battery (buffering)

and the output is loaded within the allowed limits.

• Charging mode—Describes a condition where the battery is in the process of charging, the input voltage is in range and the output is loaded

within the allowed limits.

• Inhibit mode—Describes a condition where buffering is intentionally disabled by using the inhibit input of the DC UPS (e.g. to perform

service actions or to save battery capacity).

•Buffer time—This term is equivalent to “hold-up time.”

• T.b.d.—To be defined, value or description will follow later.

Terminology and Abbreviations

Summary of content (6 pages)

PAGE 1
Reference Manual Bulletin 1606 Switched Mode Power Supplies Catalog Numbers: 1606-BATASSY1, 1606-XLSBAT1, 1606XLSBATBR1 Terminology and Abbreviations • DC-UPS—Uninterruptible power supply with DC Input. • Normal mode—Describes a condition in which the battery is charged, the input voltage is in range and the output is loaded within the allowed limits.
PAGE 2
Bulletin 1606 Switched Mode Power Supplies Battery Modules A modular concept allows the user to meet individual application demands and is available with two different options: You can order the module with an assembled battery or you can choose only the bracket allowing the mounting of individual batteries – such a long life or higher current which achieves a longer buffer-time.
PAGE 3
Bulletin 1606 Switched Mode Power Supplies Intended Use • This device is designed for installation in an enclosure and is intended for the general professional use such as in industrial control, office, communication, and instrumentation equipment. • Do not use this power supply in aircraft, trains, nuclear equipment or similar systems where malfunction may cause severe personal injury or threaten human life. • This device is designed for use in non-hazardous, ordinary or unclassified locations.
PAGE 4
Bulletin 1606 Switched Mode Power Supplies Physical Dimensions Fig. 1 Front view Fig. 2 Side view Panel/Wall Mounting Fig. 3 Detaching DIN rail brackets Fig. 4 Detach slide Detach the two aluminium brackets by removing the two screws with a Torx screwdriver (Torx 10). Remove the plastic lock mechanism by using a flat-blade screwdriver to press the lock downwards while pushing the plastic slide upwards at the same time. Detach the plastic slide. Fig. 6 Rear hole pattern 4 Fig.
PAGE 5
PAGE 6
Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products. At http://www.rockwellautomation.com/support, you can find technical manuals, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools. You can also visit our Knowledgebase at http:// www.rockwellautomation.