Reference Manual

All parameters are specified at 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
Rockwell Automation Publication 1606-RM036A-EN-P — April 2014 21
Bulletin 1606 Switched Mode Power Supplies
25. Accessories
Battery Modules
Two pre-assembled battery modules with a single 12V battery are available for dierent buer times. As an option,
the mounting brackets are also available without batteries. This option oers more exibility in selecting an
appropriate battery and can result in savings in shipping and logistics. See individual datasheets for each model.
1606-XLSBATASSY1 1606-XLSBATASSY2
Battery type Standard version
12V, 7Ah
High current version
12V, 26Ah
VRLA lead-acid maintenance free
battery
Service life 3 to 5 years 10 to 12years According to EUROBAT guideline
Dimensions 155x124x112mm 214x179x158mm Width x height x depth
Weight 3.2kg 9.9kg
DIN rail mountable yes no
Order number 1606-XLSBATASSY1 1606-XLSBATASSY2 Battery module
1606-XLSBATBR1 1606-XLSBATBR2 Mounting bracket without battery
1606-XLSBAT1 1606-XLSBAT2 Replacement battery only
Fig. 25-1 1606-XLSBATASSY1 Fig. 25-2 1606-XLSBATASSY2
1606-XLB Wall / Panel mounting bracket
This bracket is used to mount the DC-UPS units onto a at surface without a DIN rail. The two aluminium brackets and
the black plastic slider of the DC-UPS have to be removed before you can mount the two surface brackets.
Fig. 25-3 1606-XLB Wall / Panel Mounting Bracket Fig. 25-4 Assembled Wall / Panel Mounting Bracket