Reference Manual Manual

All parameters are specified at 24V, 3.8A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
14 Rockwell Automation Publication 1606-RM023A-EN-P — January 2014
Bulletin 1606 Switched Mode Power Supplies
Product certification information (including Certificates and Declarations of Conformity) can be found at www.ab.com/certification.
18. Certications
UL 508
LISTED E56639; listed for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95) Industrial Control Equipment
UL 60950-1
RECOGNIZED E168663; recognized for use in the U.S.A. (UL 60950-1)
and Canada (C22.2 No. 60950-1);
Information Technology Equipment, Level 3
GOST R
GOST R certication is applicable for products intended for sale
and use within Russia. See below for link to the certicate.
C-TICK
C-tick compliance is for products intended for sale and use within
the Australian market. See below for the link to the C-tick
Declarations of Conformity.
Marine GL GL (Germanischer Lloyd) classied for marine and offshore
applications. Environmental category: C, EMC2. See below for link
to the certicate.
Marine Rina
RINA (Registro Italiano Navale) certied. See below for the link to
the certicate.
CSA Certied under File Number 240020CSA 22.2 No 107,1-01
60950-1
RECOGNIZED UNDER FILE NUMBER E244404 for use in the U.S.A.
(ISA 12.12.01) and Canada (C22.2 No. 213)
Hazardous Location Class I Div 2 - Groups A, B, C, D
ISA 12.12.01, CSA
C22.2 No. 213
ATEX
Approval for use in hazardous locations Zone 2 Category 3G.
Number of ATEX Certicate: EPS 11 ATEX 1 312 X
The redundancy module must be built-in in an IP54 enclosure.
II 3G Ex nA IIC T4 Gc
ATEX
IECEx
IEC 60079-0, IEC 60079-15
IECEx
Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc locations.
Number of IECEx certicate: IECEx EPS 14.0008X
EN 60950-1, EN 61204-3
Complies with CE EMC and CE Low Voltage Directives