User Manual

Publication 0160-5.18 - June 2003
Using 160-DN2 with DeviceNet Scanner 6-15
Configuring the Scanner
(Continued)
Mapping the Output I/O
1. In the Scanner Module dialog box, click the Output tab. To
display this dialog box, right-click the scanner in the
configuration view (Figure 6.9
).
Figure 6.13
Output Page on the Scanner Module Dialog Box
If you selected the Automap on Add box in the Scanlist tab
(Figure 6.10
), RSNetWorx has already mapped the I/O. If it is not
mapped, click Automap to map it. If you need to change the
mapping, click Advanced and change the settings. Click Help for
assistance.
2. In the Memory box, select a location in scanner memory.
In our example, we are using a 1756-DNB scanner and selected
Assembly Data.
Scanner Memory Locations
1747-SDN Discrete or M-File
1756-DNB Assembly Data
1771-SDN Block Xfer 62 – 57