Manual

Publication 0160-5.5 - September 1997
DeviceNet Information B-27
Configuration Assembly Data
Formats (Continued)
Instance 190 Data Format (Full Configuration Assembly – Series B Preset Model)
Config Num.
Parameter
Number
Description Size Config Num.
Parameter
Number
Description Size
1 30 Accel Time 1 2 29 61 Preset Frequency 0 2
2 31 Decel Time 1 2 30 62 Preset Frequency 1 2
3 32 Minimum Frequency 1 31 63 Preset Frequency 2 2
4 33 Maximum Frequency 2 32 64 Preset Frequency 3 2
5 34
Stop Mode Select
133 65 Preset Frequency 4 2
6 35 Base Frequency 1 34 66 Preset Frequency 5 2
7 36 Base Voltage 2 35 67 Preset Frequency 6 2
8 37 Maximum Voltage 2 36 68 Preset Frequency 7 2
9 38 Boost Select 1 37 69 Accel Time 2 2
10 39 Skip Frequency 2 38 70 Decel Time 2 2
11 40 Skip Frequency Band 1 39 71 IR Compensation 1
12 41 Motor Overload Select 1 40 72 Slip Compensation 1
13 42 Motor Overload Current 2 41 73 Reverse Disable 1
14 43 Current Limit 1 42 15 Interface Select 1
15 44 DC Hold Time 1 43 77 Motor Base RPM 2
16 45 DC Hold Voltage 1 44 28
DN Fault Mode
1
17 46
Input Mode
145 22 Output Assembly 1
18 47 Output Configuration 1 46 23 Input Assembly 1
19 48 Output Threshold 2 47 18 Nonvolatile MAC ID 1
20 49 PWM frequency 1 48 19 Nonvolatile Baud 1
21 50 Restart Tries 1 50 24 Assembly Word 0 1
22 51 Restart Time 2 51 25 Assembly Word 1 1
23 52 DB enable 1 52 26 Assembly Word 2 1
24 53 S-Curve 1 53 27 Assembly Word 3 1
25 55 Memory Probe Address 2 54 85 DNet Idle Mode 1
26 57 Program Lock 1 55 87 Change of State Mask 2
27 58 Internal Frequency 2 56 88 Local Return Mode 1
28 59 Frequency Select 1 57 20 Bus Off Error 1
!
!
!
!
ATTENTION: Changing this parameter value may cause unpredictable network conditions, resulting in equipment damage, personal injury, or death.
Ensure that you understand how changing this parameter affects your application.