Manual

Publication 0160-5.5 - September 1997
B-26 DeviceNet Information
Configuration Assembly Data
Formats (Continued)
Instance 190 Data Format (Full Configuration Assembly – Series B - Signal Follower Model)
Config Num.
Parameter
Number
Description Size Config Num.
Parameter
Number
Description Size
1 30 Accel Time 1 2 27 58 Internal Frequency 2
2 31 Decel Time 1 2 28 59 Frequency Select 1
3 32 Minimum Frequency 1 29 60 Zero Offset 2
4 33 Maximum Frequency 2 30 69 Accel Time 2 2
5 34
Stop Mode Select
131 70 Decel Time 2 2
6 35 Base Frequency 1 32 71 IR Compensation 1
7 36 Base Voltage 2 33 72 Slip Compensation 1
8 37 Maximum Voltage 2 34 73 Reverse Disable 1
9 38 Boost Select 1 35 74 Analog Select 1
10 39 Skip Frequency 2 36 75 Analog Input Minimum 2
11 40 Skip Frequency Band 1 37 76 Analog Input Maximum 2
12 41 Motor Overload Select 1 38 15 Interface Select 1
13 42 Motor Overload Current 2 39 77 Motor Base RPM 2
14 43 Current Limit 1 40 28
DN Fault Mode
1
15 44 DC Hold Time 1 41 22 Output Assembly 1
16 45 DC Hold Voltage 1 42 23 Input Assembly 1
17 46
Input Mode
143 18 Nonvolatile MAC ID 1
18 47 Output Configuration 1 44 19 Nonvolatile Baud 1
19 48 Output Threshold 2 45 24 Assembly Word 0 1
20 49 PWM frequency 1 46 25 Assembly Word 1 1
21 50 Restart Tries 1 47 26 Assembly Word 2 1
22 51 Restart Time 2 48 27 Assembly Word 3 1
23 52 DB enable 1 49 85 DNet Idle Mode 1
24 53 S-Curve 1 50 87 Change of State Mask 2
25 55 Memory Probe Address 2 51 88 Local Return Mode 1
26 57 Program Lock 1 52 20 Bus Off Error 1
!
!
!
!
ATTENTION: Changing this parameter value may cause unpredictable network conditions, resulting in equipment damage, personal injury, or death.
Ensure that you understand how changing this parameter affects your application.