Manual

Publication 0160-5.5 - September 1997
DeviceNet Parameter Descriptions 5-3
Product Codes and EDS Files Bulletin 160 SSC drives are available in Analog Signal Follower and
Preset Speed models. Each model supports a slightly different set of
parameters (in general the Preset Speed model contains extra parame-
ters for setting up preset speeds). Therefore each drive model uses an
EDS file specific to that model. Configuration tools such as
DeviceNet Manager use “product codes” to identify which EDS file
to use for a given drive model. Table 6 and Table 7 summarize the
various product codes. Note that each product code is based on the
drive model, type of parameter interface to be used and the firmware
version of the drive.
Important: XX.eds = the major firmware revision number of the
Bulletin 160.
Examples:
4.eds refers to Bulletin 160 with firmware version 4.04 or 4.07
5.eds refers to Bulletin 160 with firmware version 5.00 to 5.99
6.eds refers to Bulletin 160 with firmware version 6.00 or later
It is important that the correct EDS file for both the drive and the
DeviceNet option be selected. If an incorrect one is chosen, the con-
figuration tool may be unable to set up the drive.
Table 6: EDS Files for Bulletin 160 using a 160 DN-1 version 2.00 or later
Product Code Drive Model Parameter Interface EDS File Name
132 Analog Signal Follower Bulletin 160 SSC Interface 2.typ/132.cod/XX.eds
133 Analog Signal Follower ODVA Drive Profile Interface 2.typ/133.cod/XX.eds
134 Preset Speed Bulletin 160 SSC Interface 2.typ/134.cod/XX.eds
135 Preset Speed ODVA Drive Profile Interface 2.typ/135.cod/XX.eds
Table 7: EDS Files for Bulletin 160 using a 160 DN-1 version 1.2
Product Code Drive Model Parameter Interface EDS File Name
1 Analog Signal Follower Bulletin 160 SSC Interface 2.typ/1.cod/XX.eds
2 Analog Signal Follower ODVA Drive Profile Interface 2.typ/2.cod/XX.eds
3 Preset Speed Bulletin 160 SSC Interface 2.typ/3.cod/XX.eds
4 Preset Speed ODVA Drive Profile Interface 2.typ/4.cod/XX.eds