Owner's manual

Appendix A Specifications and Accessories
A-4
Accessories
For All Controller Ratings – 0.37 to 2.2kW (1/2 to 3 HP)
Controller
Ratings
Dynamic
Brake
Module
MOV
Module
3% Line
Reactors
Open
Style
Line
Filters
Capacitor
Module
Input Voltage
Rating
HP kW Cat. No. Cat. No. Cat. No. Cat. No.
Cat. No.
Cat. No.
1/2 0.37 160-BMA1 160-MMA1 160S-LFA1 160S-RFA-6-A 160-CMA1
200 – 240V
3/4 0.55 160-BMA1 160-MMA1 160S-LFA1 160S-RFA-6-A 160-CMA1
50/60Hz
1 Phase
1 0.75 160-BMA1 160-MMA1 160S-LFA1 160S-RFA-10-A 160-CMA1
1 Pha
se
2 1.5 160-BMA2 160-MMA1 160S-LFA1 160S-RFA-16-A
1/2 0.37 160-BMA1 160-MMA1 1321-3R4-B 160-LFA1 160-RFB-3-A 160-CMA1
200 – 230V
3/4 0.55 160-BMA1 160-MMA1 1321-3R4-A 160-LFA1 160-RFB-3-A 160-CMA1
50/60Hz
3 Phase
1 0.75 160-BMA1 160-MMA1 1321-3R4-A 160-LFA1 160-RFB-9-A 160-CMA1
3 Pha
se
2 1.5 160-BMA2 160-MMA1 1321-3R8-A 160-LFA1 160-RFB-9-A 160-CMA1
3 2.2 160-BMA2 160-MMA1 1321-3R12-A 160-LFA2 160-CMA1
1/2 0.37 160-BMB1 160-MMB1 1321-3R2-B 160-LFB1 160-RFB-3-A 160-CMB1
380 – 460V
3/4 0.55 160-BMB1 160-MMB1 1321-3R2-A 160-LFB1 160-RFB-3-A 160-CMB1
50/60Hz
3 Phase
1 0.75 160-BMB1 160-MMB1 1321-3R2-A 160-LFB1 160-RFB-3-A 160-CMB1
3 Pha
se
2 1.5 160-BMB2 160-MMB1 1321-3R4-B 160-LFB1 160-RFB-9-A 160-CMB1
3 2.2 160-BMB2 160-MMB1 1321-3R8-B 160-LFB1 160-RFB-9-A 160-CMB1
Replacement Parts and Accessories
Fan
Replacement
Kit
Ready/
Fault
Panel
Program
Keypad
Module
DeviceNet
Communication
Module
Cat. No. Cat. No. Cat. No. Cat. No.
160-FRK1 160-B1 160-P1 160-DN1
Drive Model
24V DC Interface
Dr e Mo el
Cat. No.
Analog 160-DM-SF1
Preset 160-DM-PS1
Catalog numbers listed are for 3% impedance open style units. NEMA 1 and 5% impedance reactor types are also available, refer to
Publication 1321-2.0 for detailed information.
The 160-LF type filters are designed to meet Class A conducted emissions. These units have been tested with a maximum motor cable length of
75m (250 ft.) for 230V units and 40m (133 ft.) for 460V units.
The 160-RF type filters are designed to meet Class A and B conducted emissions. These units have been tested with a maximum motor cable length
of 25m (80 ft.) for both 230V and 460V units.
Included with controller.
The MTBF for the fan is 40,000 hours at 50_C.
Allows 24V DC sinking inputs.