User Manual

2
10000029984 Ver 00
January 27, 2009
PrintedinUSA
The original dust
cover (1585BP--
MCAP)canbeused
to ins u re proper
seating of plug.
11 12
While maintaining
pressure on plug or
keeping dust cap engaged,
tighten the flex nut to
0.5 N•m(5 in•lbs).
Place optional dust
cap (1585BP--MCAP)
chain over plug hous ing and
position between flex nut
and plug ass embly as
shown. Tighten chain to
secure.
13
ATTENTION: To assist safe installation, comply
with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals
unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
IP67 r ating can only be achieved when using
an IP67 rated enclosure with a properly assembled
industrial outlet or industrial plug cap.