Owner's manual

INSTALLATION 8-3
1557-UM050F-EN-P – June 2013
Figure 8.1 – Overhead Lifting
Rod or Pipe Rollers:
SEE FIGURE 8.2
This method is only suitable when there are no inclines and the drive is being moved on one floor level.
1. Boards 2" x 6" or equivalent and at least one foot longer than the drive must be placed under the
shipping skid.
2. Carefully ease the shipping platform over the roller pipes until the drive weight is borne on the roller
pipes.
3. The drive can be rolled to its designated location. Steady the load to prevent tipping.