Manual

18 Rockwell Automation Publication 1500-UM055G-EN-P - May 2013
Chapter 2 Installation – Standard Enclosure
Figure 17 - Access to Load Cable Conduit Openings (Top exit cable configuration shown)
(LV panels removed for clarity)
4. Remove the appropriate load cable conduit openings in the top or bottom
of the cabinet (see Figure 18
or Figure 19).
Remove Cable Duct Boot to
access Load Cable Conduit
opening for cables exiting
from bottom Power Cell
Current Transformer
Mounting Plate
Connect Load Cables to
Current Transformers
TIP
Refer to Dimensional Drawings provided with order documentation for
additional details.