Manual

Rockwell Automation Publication 1500-UM055G-EN-P - May 2013 13
Installation – Standard Enclosure Chapter 2
7. Remove each glass-polyester barrier located in front of the current
transformers (see Figure 11
).
Figure 11 - Removing Glass-polyester Barrier
8. Remove the retaining screw from the cable duct barrier and remove the
barrier (see Figure 12
).
9. Remove the two retaining screws from the cable duct boot and remove the
boot (see Figure 12
).
Current Transformers
Remove self-tapping screws
from barrier assembly
Glass-polyester barrier