Manual

Rockwell Automation Publication 1500-UM055G-EN-P - May 2013 5

Chapter 2

Installation – Standard Enclosure

Door Opening Procedure

Opening the Low Voltage Doors

Low voltage doors are identified as LV in Figure 3.

1. To access the compartments for standard cabinets – use a flat-head

screwdriver and turn both of the 1/4-turn fasteners at least 90° in a

counterclockwise direction.

2. The door is now released and will swing open.

3. Reverse the procedure to secure the doors.

Figure 3 - Access to Low Voltage Compartments

IMPORTANT

For information on the installation site preparation, see General Handling

Procedures for MV Products, Publication MV-QS050_-EN-P.

ATTENTION: Use suitable personal protective equipment (PPE) per local codes

or regulations. Failure to do so may result in severe burns, injury or death.

LV MV

1/4-turn fasteners for

Upper Low Voltage Door

1/4-turn fasteners for

Lower Low Voltage Door