User guide

Installation Standard Enclosure 2-7
1512A-UM10 2B-EN-P – June 2013
(Non ArcShield)
Center Rear Bus
Access Cover
Side Bus
Access Cover
Figure 2.6 – Bus Bars from Back Access
Side Access
A side bus access cover is located on each side of the controller.
1) Remove the hardware from the appropriate side bus access cover.
2) Remove the side bus access cover
3) Once the side bus access cover is removed, you will see the three power
bus bars and grounding bus (Figure 2.7).
Figure 2.5 – Access to Power Bus from Side and Rear of Cabinet,
Typical