Manual

86 Rockwell Automation Publication 1512A-UM100F-EN-P - May 2013
Appendix C ArcShield Chimney Installation Instructions
Chimney Placement on Structure
Once the Chimney has been lifted in place directly over the relief vent (shown in
Figure 87
), all 1/4-20 fasteners, removed in Cabinet Preparation above, are
replaced to attach the chimney to the top of the enclosure.
Figure 88 - Chimney Placement
Use recommended torque
value for 1/4-20 fasteners
TIP
Use silicone caulking generously to fill any air gaps once the chimney has been
securely mounted in place.