Manual

2 Rockwell Automation Publication 1512A-UM100F-EN-P - May 2013
Table of Contents
Chapter 5
Maintenance
Tool Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Recommended Torque Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Door Interlock Circumvention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Power Lock-out Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Fuse Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
BOLT-ON FUSE Removal/Installation. . . . . . . . . . . . . . . . . . . . . . . . 46
CLIP-ON FUSE Removal/Installation. . . . . . . . . . . . . . . . . . . . . . . . . 46
Contactor Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Removing the Contactor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contactor Interlock Rod Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
To Reduce the Gap Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
To Increase the Gap Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Isolation Switch Mechanism Inspection and Lubrication . . . . . . . . . . . . 52
Isolation Blade Switch Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Isolation Switch Mechanism Grounding Adjustment. . . . . . . . . . . . . . . . 57
Auxiliary Contacts Inspection and Replacement . . . . . . . . . . . . . . . . . . . . 58
Auxiliary Contacts Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Adjusting the Normally Open (ISa) Contacts . . . . . . . . . . . . . . . . . . . 59
Adjusting the Normally Closed (ISb) Contacts. . . . . . . . . . . . . . . . . . 60
Adjusting the Change-of-State Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Emergency Circumvention Procedure for Power Cell Entry. . . . . . . . . . 61
Installing Z-clip with Isolation Switch Handle in the
OFF Position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Installing Z-clip with Isolation Switch Handle in the
ON Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Chapter 6
Spare Parts
Spare Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Appendix A
ArcShield Unit Information
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
ArcShield Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Exhaust Systems: Chimney or Plenum Option . . . . . . . . . . . . . . . . . . . . . . 68
Plenum Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Plenum Exhaust Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Additional Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Chimney Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Chimney Exhaust Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Appendix B
ArcShield Plenum Installation
Instructions
Recommended Torque Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Plenum Bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
General Plenum Layout for ArcShield Line-up. . . . . . . . . . . . . . . . . . . . . . 74
STEP 1 – Mounting a Single Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75