Manual

Rockwell Automation Publication 1512A-UM100F-EN-P - May 2013 23
Installation – Arc-Resistant (ArcShield) Chapter 3
4. Remove the two self-tapping screws from the low voltage panel, and swing
open the LV panel (see Figure 27
).
Figure 27 - Removal of Access Door with Low Voltage Panel Rotated
5. Remove the 24 bolts that secure the access door to the frame – remove the
panel (see Figure 27
).
6. Remove the two screens at the back of the low voltage compartment (see
Figure 28
).
Figure 28 - Removal of Low Voltage Barriers to Access Power Bus
Access Door
Remove bolts securing
this access door
Swing Open Low
Voltage Panel
Low Voltage Barriers
Remove four screws
from each low
voltage barrier panel