Manual

B-110 Parameters

1503-UM054C-EN-P – June 2013

Under Voltage with Close Command Present on IB4

[IB 4 U/V with Close Command Present]

Parameter Number: 206,172,_,_,_.

Access rule: Get

Data Type: BOOL

Object Mapping: 0x384-4-31

Group: Diagnostics

Units : -

Minimum Value: 0 = Not Present

Maximum Value: 1 = Present

Default Value: 0

This parameter allows the user to view the status of the Under

Voltage with Close Command Present warning from the IB4 module.

If the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then

the warning is present. See Undervoltage with a Close Command

Present in Chapter 4 for a detailed description of this warning.

Under Voltage with Close Command Present on IB5

[IB 5 U/V with Close Command Present]

Parameter Number: 207,_,_,_,_.