Manual

B-104 Parameters

1503-UM054C-EN-P – June 2013

Power Up with Contactor Closed on IB2

[IB 2 Power-up with Contactor Closed]

Parameter Number: 194,162,130,98,_.

Access rule: Get

Data Type: BOOL

Object Mapping: 0x384-2-29

Group: Diagnostics

Units : -

Minimum Value: 0 = Not Present

Maximum Value: 1 = Present

Default Value: 0

This parameter allows the user to view the status of the Power Up

with Contactor Closed fault from the IB2 module. If the bit is ‘0’

then the warning is not present. If the bit is ‘1’ then the warning is

present. See Pow er Up w ith Contactor Closed in Chapter 4 for a

detailed description of this warning.

Power Up with Contactor Closed on IB3

[IB 3 Power-up with Contactor Closed]

Parameter Number: 195,163,131,_,_.