Manual

B-92 Parameters
1503-UM054C-EN-P – June 2013
Contactor Fails to Pick-Up on IB3
[IB 3 Contactor Fails to Pick-Up]
Parameter Number: 170,143,116,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-25
Group: Diagnostics
Units : -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Fails to Pic k-Up warning from the IB3 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Contactor Fails to Pick Up in Chapter 4 for a detailed
description of this warning.
Contactor Fails to Pick-Up on IB4
[IB 4 Contactor Fails to Pick-Up]
Parameter Number: 171,144,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-25
Group: Diagnostics
Units : -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Fails to Pic k-Up warning from the IB4 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Contactor Fails to Pick Up in Chapter 4 for a detailed
description of this warning.