Manual

B-58 Parameters

1503-UM054C-EN-P – June 2013

Power-Up Safety Setting for IB2

[IB 2 Power-Up Safety Setting]

Parameter Number: 104,90,76,62,_.

Access rule: Get

Data Type: BOOL

Object Mapping: 0x384-2-16

Group: Configuration

Units : -

Minimum Value: 0 = Enable

Maximum Value: 1 = Disable

Default Value: 0

This parameter allows the user to view the status of the Power-Up

Safety setting for the IB2 module. If it is enabled then the IB2

c ontac tor w ill not close the contactor if the unit powers up with a

Close command present. If it is disabled then the IB2 contactor will

close the contactor if the unit powers up with a Close command

present. See Power-up Safety in Chapter 8 and Table 8.F.

Power-Up Safety Setting for IB3

[IB 3 Power-Up Safety Setting]

Parameter Number: 105,91,77,_,_.