Manual

Parameters B-51
1503-UM054C-EN-P – June 2013
Table B.17 – RTC World Time Zone Selection Local (cont.)
Value Enum Text Description
13
GMT 00:00
Greenwich Mean Time
14 GMT + 01:00 Greenw ich Mean Time + 1 hour
15
GMT + 02:00 Greenwich Mean Time + 2 hours
16
GMT + 03:00
Greenwich Mean Time + 3 hours
17
GMT + 03:30
Greenwich Mean Time + 3.5 hours
18
GMT + 04:00
Greenwich Mean Time + 4 hours
19
GMT + 04:30
Greenwich Mean Time + 4.5 hours
20
GMT + 05:00
Greenwich Mean Time + 5 hours
21
GMT + 05:30
Greenwich Mean Time + 5.5 hours
22
GMT + 05:45 Greenwich Mean Time + 5.75 hours
23
GMT + 06:00
Greenwich Mean Time + 6 hours
24
GMT + 06:30
Greenwich Mean Time + 6.5 hours
25
GMT + 07:00
Greenwich Mean Time + 7 hours
26
GMT + 08:00
Greenwich Mean Time + 8 hours
27 GMT + 09:00 Greenw ich Mean Time + 9 hours
28
GMT + 09:30 Greenwich Mean Time + 9.5 hours
29
GMT + 10:00 Greenwich Mean Time + 10 hours
30
GMT + 11:00
Greenwich Mean Time + 11 hours
31
GMT + 12:00
Greenwich Mean Time + 12 hours
32
GMT + 13:00
Greenwich Mean Time + 13 hours
Override a Network Fault [Network Override]
Parameter Number: 91,79,67,55,42.
Access rule: Get/Set
Data Type: BOOL
Object Mapping: 0x1E-1-104
Group: Configuration
Units : -
Minimum Value: 0 = Disabled
Maximum Value: 1 = Enabled
Default Value: 1
This parameter allows the user to view and set the condition where
the local logic (DeviceLogix) will override a DeviceNet Network
Fault (ie. Bus off or duplicate MACID). If it is disabled then the
local logic (DeviceLogix) cannot override a DeviceNet Network
Fault and it will cease operating. If it is enabled then the logic
(DeviceLogix) can override a DeviceNet Network Fault and it will
continue to operate.