Manual

Parameters B-45
1503-UM054C-EN-P – June 2013
Status of the Change Of State Mask [Set to Defaults]
Parameter Number: 83,71,59,47,34.
Access rule: Get/Set
Data Type: USINT
Object Mapping: 0xB4-1-19
Group: Communication
Units : -
Minimum Value: 0 = No Operation
Maximum Value: 1 = Set DNet & DLX Defaults
Default Value: 0
This parameter allows the user to view and set the IntelliVAC Plus to
the factory default values. The parameters which are set to defaults
and their values are listed below.
Table B.12a – Status of the Change of State mask Defaults
Parameter Description Default Setting Parameter Group Parameter #
DNet MAC ID 63 DeviceNet 77
DNet Baudrate
500k
DeviceNet
76
Autobaud enable
Disabled
DeviceNet
79
Consumed I/O assembly
Default assembly
DeviceNet
84
Produced I/O assembly Default assembly DeviceNet 85
Produced network bits & Status bits
COS mask
No mask DeviceNet 86
Preload DLX Program Selection
User Customized
Program
DeviceLogix 66
Control Mask
Local
DeviceLogix
67
IE DeviceLogix output fault action Fault value (0) DeviceLogix 72
IE DeviceLogix output idle action Idle v alue (0) DeviceLogix 74
Network override
Disabled
DeviceNet
91
Communications ov erride
Disabled
DeviceNet
92
Time Zone
GMT 00:00
DeviceNet
90
TDUV time source
From IB
DeviceNet
328
Drop out time source From IB DeviceNet 329
Altitude
-1000 – 0000m
DeviceNet
87
Loss communications action
Hold
DeviceNet
68
MC system locked Clear DeviceNet 349
IE status word Clear DeviceNet 345
MC status word
Clear
DeviceNet
346
IB1 status word
Clear
DeviceNet
335
IB2 status word
Clear
DeviceNet
336
IB3 status word Clear DeviceNet 337
IB4 status word Clear DeviceNet 338
IB5 status word
Clear
DeviceNet
339