Manual

B-16 Parameters
1503-UM054C-EN-P – June 2013
Contactor Relay Status for IntelliVAC Base Unit #1
[IB 1 Contactor Status Relay Status]
Parameter Number: 26,21,16,11,6.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-6
Group: Control
Units : -
Minimum Value: 0 = Open
Maximum Value: 1 = Closed
Default Value: 0
This parameter allows the user to view the status of the Contactor
Status relay for the IntelliVAC Basic Module #1. An Open refers to
the Contactor Status relay contacts being in an Open state. A Closed
status refers to the Contactor Status relay contacts being in a Closed
state. See the Electrical Specifications section in Table 1.A for the
Contactor Status relay contact ratings.
Contactor Relay Status for IntelliVAC Base Unit #2
[IB 2 Contactor Status Relay Status]
Parameter Number: 27,22,17,12,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-6
Group: Control
Units : -
Minimum Value: 0 = Open
Maximum Value: 1 = Closed
Default Value: 0
This parameter allows the user to view the status of the Contactor
Status relay for the IntelliVAC Basic Module #2. An Open refers to
the Contactor Status relay contacts being in an Open state. A Closed
status refers to the Contactor Status relay contacts being in a Closed
state. See the Electrical Specifications section in Table 1.A for the
Contactor Status relay contact ratings.