Manual

DeviceLogix 9-37
1503-UM054C-EN-P – June 2013
This is the output portion of the “Start” dual function bit.
Net Out 28/Stop
This is the output portion of the “Stop” dual function bit.
Net Out 29/FWD
This is the output portion of the “FWD” dual function bit.
Net Out 30/REV
This is the output portion of the “REV” dual function bit.
Net Out 31/Jog
This is the output portion of the “Jog” dual function bit.
Customized Logic Simple example
Hardware set up for this example:
 A Normally open pushbutton is connected to DLX Input 1
 A Normally closed pushbutton is connected to DLX Input 2
 An Electrically held contactor is connected to the IntelliVAC
Plus unit
 Per Rockwell Standard a Normally closed contactor Auxiliary
contact is connected to IB1-Aux.
Figure 9.19 – Basic Logic Program