User Manual

1500-IN059C-EN-E – June 2013
4-6 Installation
825 Plus Installation (cont.)
6. Before completely tightening the mounting hardware ensure the
825 Plus is mounted on a level plane both horizontally and vertically.
(Figure 4.18)
7. Reconnect the various interface connectors on the back of the 825
Plus. (Figur
es 4.14, 4.16 and 4.17)
8. Ensure all ground wires are connected. (Figure 4.20)
Figure 4.15
Figure 4.18 – Front View
Figure 4.16 – Cable to Converter Module
Figure 4.17 – Rear View