Owner's manual

1500-IN058D-EN-E – June 2013
B-2 Technical Data
Conversion Kit Interface
Panel (cont.)
Converter Module
Description Specification
Terminals (TB1 and TB3)
Type Screw terminal with wire clamp
Approvals CSA certified and UL listed
Voltage Rating 300 V AC/DC
Maximum Current 25 A
Wire Range 0.5 to 1.5 mm
2
(#22 - #14 AWG)
Wire Strip Length 6.4 mm (0.25 inch)
Recommended Tightening Torque 6-14 lb.-in. (0.7 – 1.6 Nm)
Insulation Temperature Range -40°C to +105°C (-40°F to +221°F)
Terminals (TB2)
Type Screw terminal with #6 screw
Approvals CSA certified and UL listed
Voltage Rating 600 V AC/DC
Maximum Current 20 A
Wire Range 0.5 to 1.5 mm
2
(#22 - #14 AWG)
Wire Strip Length Prepared Conductors Only n
Recommended Tightening Torque 12 lb.-in. (1.4 Nm)
Insulation Temperature Range -40°C to +105°C (-40°F to +221°F)
n Prepared conductors utilize ring, spade or hook connectors.
Description Specification
Terminals
Bulletin 825 plug-in terminals
(Range of cross-section)
• 0.5 to 1.5 mm
2
(20 AWG to 14 AWG), single wire
• 0.5 to 1.5 mm
2
(20 AWG to 14 AWG), double wire
• 0.5 to 1.5 mm
2
(20 AWG to 14 AWG)
• Nominal 1.5 mm
2
(.0023 in.
2
)
Cat. No. 825-MCM5
• 2 x 2.5 mm
2
/1 x 4 mm
2
(2 x .0039 in
2
/1 x .006 in
2
)
• 2 x 0.5 to 1.5 mm
2
(20 AWG to 14 AWG) /
1 x 0.5 to 2.5 mm
2
(20 AWG to 12 AWG)