Owner's manual

(Cat 150-SM2)

SMC-50 PTC, Ground and Current Feedback Option Module

Installation Instructions

PN-164973

DIR 10000152877 (Version 02)

Publication 150-IN051C-EN-E

Printed in U.S.A.

Port Compatibility*

90°

7 8 9

ok ok

0.45 Nm

(4 lb-in)

*only one 150-SM2 per controller

WARNING: To prevent electrical shock, disconnect from power source before

installing or servicing. Install in a suitable enclosure. Keep free from contaminants.

N223

25U6

IND. CONT. EQ.

PAGE 1
SMC-50 PTC, Ground and Current Feedback Option Module Installation Instructions (Cat 150-SM2) N223 25U6 IND. CONT. EQ. WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. 1 2 Port Compatibility* 7 8 ok ok 9 *only one 150-SM2 per controller 90° 0.45 Nm (4 lb-in) 1 7 2 8 9 3 4 1 2 PN-164973 DIR 10000152877 (Version 02) Publication 150-IN051C-EN-E Printed in U.S.A.
PAGE 2
5 3 1 90° 2 0.8 Nm (7 lb-in) 3 TB 2 TB 3 TB TB 2 1 TB 3 0.2 - 2.5 mm2 (#24 - #14 AWG) SHIELDED CABLE 0.2 - 2.5 mm2 (#24 - #14 AWG) SHIELDED CABLE 4 TB 2 4 7.0 mm (0.
PAGE 3
Field Wiring Terminal Identification 150-SM2 TB2 TB3 TB2 TB3 1 1 2 RG25U Female 2 TB4 TB4 RG25U Male Shield Shield Motor PTC Sensor Cable (1) M 825-MCMxx 1 2 825-MCMxx Cable (1)(2) T1/2 Wh Bla ite ck To Control Module Terminal #3 Ground Sh ield L1/1 SMC-50 T2/4 L2/3 T3/6 L3/5 Circuit Branch Protection Fast-acting SCR fuses Optional(1) (1) (1) External Bypass (1)(4) 825-CBCT Ground Fault Core Balance Sensor (1) (3) Footnotes (1) Customer Supplied (2) The 825-MCMxxx can be used
PAGE 4
PN-164973 DIR 10000152877 (Version 02) Publication 150-IN051C-EN-E Printed in U.S.A.