Owner manual

Bulletin 150 SMC-Flex and SMC-3 (108-135A) Series B Protective Module Installation
(Cat 150-F84L (480V), 150-F86L (600V))
Terminal Cover Removal (SMC-Flex Shown)
1
3
2
4
5
4
6
7
9
8
8
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.