Owner manual

ManualsBrandsRockwell Automation ManualsEquipment150-F84L_F86L Soft Starter Protective Modules

Bulletin 150 SMC-Flex and SMC-3 (201-480A) Series B Protective Module Installation

(Cat 150-F84L (480V), 150-F86L (600V))

Line Side Terminal Cover Removal (SMC-Flex Shown)

Load Side Terminal Cover Removal (SMC-Flex Shown)

PN-164127

DIR 41053-227 (Version 07)

Publication 150-IN036G-EN-E

Printed in U.S.A.

WARNING: To prevent electrical shock, disconnect from power source before installing

or servicing. Install in a suitable enclosure. Keep free from contaminants.

WARNING: Protective modules must not be mounted on the load side when used with controllers that use an

inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor

connection will result in immediate damage to the protective module.

Summary of content (10 pages)

PAGE 1
Bulletin 150 SMC-Flex and SMC-3 (201-480A) Series B Protective Module Installation (Cat 150-F84L (480V), 150-F86L (600V)) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. WARNING: Protective modules must not be mounted on the load side when used with controllers that use an inside-the-delta motor connection or with pump, linear deceleration or braking control.
PAGE 2
Protective Modules Installation 10 lb-in (1.1 Nm) 1 3 4 NET B NET A MOD PORT 3 Esc 2 23 24 25 26 27 28 29 30 31 32 33 34 11 12 13 14 15 16 17 18 19 20 21 22 28 lb-in (3.2 Nm) Click Click 4 6 5 5 Click Click 7 8 4 10 7 9 9 PN-164127 DIR 41053-227 (Version 07) Publication 150-IN036G-EN-E Printed in U.S.A.
PAGE 3
Bulletin 150 SMC-Flex and SMC-3 (108-135A) Series B Protective Module Installation (Cat 150-F84L (480V), 150-F86L (600V)) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. WARNING: Protective modules must not be mounted on the load side when used with controllers that use an inside-the-delta motor connection or with pump, linear deceleration or braking control.
PAGE 4
Protective Modules Installation 2 28 lb-in (3.2 Nm) 3 10 lb-in (1.1 Nm) 4 1 3 Click Click Click Click 8 7 5 7 6 PN-164127 DIR 41053-227 (Version 07) Publication 150-IN036G-EN-E Printed in U.S.A.
PAGE 5
Bulletin 150 SMC-Flex (625-1250A) Series B Protective Module Installation (Cat 150-F84L (480V), 150-F86L (600V)) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. WARNING: Protective modules must not be mounted on the load side when used with controllers that use an inside-the-delta motor connection or with pump, linear deceleration or braking control.
PAGE 6
PN-164127 DIR 41053-227 (Version 07) Publication 150-IN036G-EN-E Printed in U.S.A.
PAGE 7
SMC-50 Protective Module Installation Instructions (Cat 150-F84L (480V), 150-F86L (600V)) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. WARNING: Protective modules must not be mounted on the load side when used with controllers that use an inside-the-delta motor connection or with pump, linear deceleration or braking control.
PAGE 8
Load Terminal Cover Installation 2 Click 1 2 Click 3 4 Click 6 Click 4 5 5 Line Terminal Cover Installation 2 4 1 3 6 Click Click Click 6 Click 5 PN-164127 DIR 41053-227 (Version 07) Publication 150-IN036G-EN-E Printed in U.S.A.
PAGE 9
SMC-50 Protective Module Installation Instructions (Cat 150-F84L (480V); 150-F86L (600V)) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in a suitable enclosure. Keep free from contaminants. WARNING: Protective modules must not be mounted on the load side when used with controllers that use an inside-the-delta motor connection or with pump, linear deceleration or braking control.
PAGE 10
Protective Modules Installation - 150-SD_ 28 lb-in (3.2 Nm) 3 10 lb-in (1.1 Nm) 4 10 lb-in (1.1 Nm) 2 1 28 lb-in (3.2 Nm) PN-164127 DIR 41053-227 (Version 07) Publication 150-IN036G-EN-E Printed in U.S.A.