Installation Instructions (30A, 60A, 100A) Owner manual

PN-224754

DIR 10001182729 (Version 01)

Handle and Cable Mechanism Installation

Cable Operated Switch Installation

1 Install gasket. 2 Connect handle link to lever pin. 3 Install hitch pin through handle link.

TIP: Move handle to

“ON” position to help

connect handle link

to lever pin. Return

handle to “OFF”

position once

connected.

4 Verify handle is in “OFF” position.

5 Install handle nuts.

6 Install spring to handle link.

30 - 40 lb-in

8 Install defeater lever.

7 - 11 lb-in

Defeater

Lever

7 Install other end of spring to cable mechanism bracket

using needlenose pliers.

(5)