Quick Start

2
Unpacking and Inspecting
Figure 1 - Removing the Printer from Packaging
1. Take printer out of box
2. Remove protective foam
3. Place on a flat, stable surface
4. Check the delivery contents:
–Printer
–Power cord
–USB cable
Quick Start Guide (this document)
–ClearMark Printer user manual
–ClearTools Software user manual
Printer driver and ClearTools
software CD
Two marker cards (Cat. No. 1492-M5X5)
–Output rail
Grips
ATTENTION: Printer weight is
approximately 65 lb. Always use
two people and make use of the
grips when moving.