User Manual Manual

146

Print User Manual
Printer correction
The printer may vary from its standard calibration in both the horizontal and vertical directions as
a result of environmental conditions or maker-specific issues.
 To adjust the printer's feed rate, select File > Set Printer Correction....
The following dialog appears:
Print a test page with a rectangle whose size you have to specify..
 In the Specified Width (X) and Specified Height (Y) fields enter the size of the rectangle
and click the Print Rectangle button..
 Measure the width and height of the printed rectangle, and enter these figures in the Actual
Width (X) and Actual Height (Y) fields if they vary from the specified values.
 Close the window with OK.