User Manual User Manual

7-2 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 7 Maintenance
Figure 7.1 - Print head cleaning option
Cleaning the print head
The cleaning process cleans the print head when a printed image appears slight
blurred. Please take the following steps:
1. Select "Cleaning type 1" and the corresponding print heads.
Figure 7.2 - Cleaning the print head
2. Click [Execute Head-Cleaning].
3. The cleaning process is initiated. This can take several minutes to run.
4. After the process has been executed by ClearMark, print out a marker card
and check the printing quality. Repeat this process if necessary or run
through a head-flushing process.