User Manual User Manual

5-8 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 5 Calibration
Note: For examples of drifting text, (See Figure 5.14 and Figure 5.15). Use
the yellow center lines as reference.
Figure 5.14 -
Note to edit: Center all lines on each column of the marker tags
10. If the text gradually drifts to the right
of the tags, decrease the
[Width (X):] value.
11. 11. If the text gradually drifts to the left
of the tags, increase the
[Width (X):] value
12. If the height is not set correctly, the text will gradually drift out of
alignment from top to bottom. (See Figure 5.15)
Figure 5.15 -
Note to edit: Center all lines on each column of the marker tags**
13. If the text gradually drifts up
, decrease the [Height (Y):] value
14. If the text gradually drifts down
, increase the [Height (Y):] value