User Manual

Fuse Holders and
Fuse Data
(5)
10000021918 (Version 01)
V. Fuse Installation and Replacement (Continued)
4) To add and/or replace the fuse turn the circuit board over. The fuses and fuse information is visible on the circuit
board.
NOTES:
1) For conversion module operation a fuse must be inserted into each of the 8 fuse holders.
2) Physical Fuse Size: 5 x 20 mm
3) Possible Fuse Suppliers: Shurter (Part Number: 0032.3123) and Cooper Bussmann (Part Number: GMC-2A) .
4) Fuse Current Rating Based on Conversion System Components: 2 Amps
VI. Conversion Module Re-assembly After Fuse Insertion/Replacement
1) To re-assemble the fused module, place the circuit board into the label side half of the module case with the fused
side of the circuit board UP.
Case surface with module label